Need help?Do you have a question about the Varco HT-Tong HT200 and is the answer not in the manual?
Covers MPI acceptance criteria, torque testing, wear limits, and changing dies/inserts.
Step-by-step guide for installing the HT Tong, including support lines and balancing.
Outlines safe procedures for operating HT tongs, including grip, pull, and assembly configurations.
Explains torque calculation and application for making up connections, including line pull measurement.
Lists common issues, their causes, and suggested solutions for HT-Tong operation.
Identifies potential hazards, failure points, and consequences for HT-Tong operation.
Illustrates critical areas and part numbers for manual tong latch lug jaws.
Illustrates critical areas and part numbers for manual tong latch jaws.
Illustrates critical areas and part numbers for manual tong short jaws.
Illustrates critical areas and part numbers for manual tong levers.
Illustrates critical areas and part numbers for manual tong long jaws.
Illustrates critical areas and part numbers for manual tong hinge jaws.
To Next Page
General