INSTALLATION PROCEDURE
ii www.vareximaging.com
Before You Begin Spring Loaded R-Type Connectors
Before You Begin
• To avoid personal injury or product damage, read the manual and all accompanying papers
carefully before operating the detector.
• The X-ray Tube is intended for use by qualified professional personnel who are trained and
knowledgeable in the use of X-ray Tubes, X-ray systems, and electrical equipment as well as
the safety precautions to avoid possible injuries.
• The user is responsible for using and maintaining the detector according to prescribed
installation, usage, maintenance, handling, and storage specifications. To keep the X-ray
Tube and its accessories in safe and proper condition, only trained and qualified professional
person(s) shall be in charge of maintenance.
• In no event is Varex Imaging liable for direct, indirect, or consequential injury, damage, or
loss of equipment operation time or image data arising from the use of the X-ray Tube, its
components, and/or accessories.
Protection Against Ionizing Radiation
• Exposure of any part of the human body to X-radiation may be harmful to health. Whenever
X-ray equipment, ionizing, or radioactive sources are in use, appropriate safety precautions
and measures shall be instituted, and all regulatory requirements must be met. It is the
responsibility of the X-ray system installer, operator, and user to comply with applicable
requirements.
• The X-ray detector does not contain a primary barrier for X-rays or Gamma rays. The X-ray
system installer or X-ray system manufacturer must provide the necessary protection based
on the X-ray system’s intended use.
• For portable applications, the X-ray system installer or X-ray system manufacturer must
provide the necessary training for operators to protect themselves, patients, and surrounding
persons.
To Next Page
Loading...
