Pre-Ride Checklist 19
☆ Brake
Check the brake options for proper function. When you pull the brake lever, the brake should provide positive braking action.
☆ Tire
Periodically inspect the tires has suf�icient tread remaining.
☆ Battery
Before riding, check the current voltage on the display (check the battery bar or press the M key to VOL to see voltage).
When it's 48V, the range is about 5 miles (8 km); when the voltage is lower than 40V or the battery bar is only one bar, it means the battery is about to run
out, it needs to be charged as soon as possible.
☆ Frame and handlebar
Check for cracks or broken connections. Although broken frames are rare, it is possible for an aggressive rider to run into a curb or object and wreck, bend
or break a frame.
☆ Safety gear
Before the ride, please wear your helmet, gloves, elbow protection, waist protection and other protective gears.
☆ Law and regulations
Always check and obey any local laws or regulations.
☆ Storage
Exposure to UV rays, rain and other bad weather may damage the materials, store cool and dry indoors when not in use.
*When riding in gear 2 or above, the front and rear brakes must be braked together when you brake!
To Next Page
Loading...
