Need help?Do you have a question about the VarTech Systems VTPC900PSS and is the answer not in the manual?
Covers essential safety rules for operation, cleaning, and handling, including electrical hazards.
Highlights critical warnings regarding disconnection of equipment in hazardous areas and potential ignition sources.
Specifies suitability for Class I, Division 2 Groups A, B, C, D and non-hazardous locations.
Details requirements for cabling, components, enclosures, and operating temperature codes in hazardous areas.
Defines intended use in Pollution Class 2 environments, overvoltage category, and altitude limits.
Outlines requirements for mounting in suitable enclosures, gasketed bezels, and peripheral equipment suitability.
Details the display characteristics including size, resolution, contrast ratio, viewing angles, and pixel pitch.
Lists components such as processor, memory, storage, operating system, and expansion slots.
Defines power input, consumption, operational temperature, and humidity ranges for the unit.
Step-by-step guide for cutting, drilling, and securing the panel mount enclosure into a cutout.
Illustrates the rear panel layout and identifies key connectors like power, serial, network, and USB ports.
Details how to connect power, serial, Ethernet, USB, and VGA, emphasizing non-incendive requirements.
Instructions on turning the system on/off, proper shutdown procedures, and continuous duty rating.
Guidance on allowing the LCD/LED monitor to reach thermal stability before adjusting parameters.
Recommendations for cleaning the enclosure using soft cloths and avoiding abrasive or solvent-based cleaners.
General| Mounting Options | Panel mount, VESA mount |
|---|---|
| Power Supply | 12V DC |
| RAM | 4 GB |
| Connectivity | Ethernet |
| Operating Temperature | 0°C to 50°C |
| IP Rating | IP65 |
| Brightness | 350 cd/m² |
| Ports | 2 x USB, 1 x RS-232 |
To Next Page