VARUN M26-2 Red - Page 67

- 24 -
There are three buttons on the instrument, including on/off, plus/headlight, and
minus/boost; in the instructions that follow, the on/off button is replaced by the word "ON/OFF",
the "+" button is replaced by the word "UP", and the "-" button is replaced by the word "DOWN".
Setup Instructions:
 Display Interface: After the instrument is turned on, the instrument will
display real-time speed, single mileage, total mileage, power and battery by
default. Short press "ON/OFF" button can switch between total mileage (km),
maximum speed (km/h), average speed (km/h), time (MIN).
 Assisted Push: Press and hold the "DOWN" button, after 2 seconds, the
electric vehicle enters the electrically assisted push state. The electric vehicle
will travel at a constant speed of not more than 6Km/h. Release the "DOWN"
button and the scooter will immediately stop power output and return to the
state before power assisted pushing.