Vasco RF - Page 19

EN
19
BINDING THE RF REMOTE CONTROL
See also manual included with the radiator
packaging or on the website.
Attention:
- A maximum of 5 RF receivers can be connected to 1 RF remote
control.
- A maximum of 1 blower can be connected to 1 RF remote control.
- It’s not possible to connect 1 blower and one or more RF receivers
to 1 RF remote control.
RF pairing:
1. a. RF reciever
Put the RF receiver in pairing mode by pressing the button for
5 sec. The LED will start to blink in RED.
5 sec.
b. Blower
Put the blower in frost protection mode by pressing 3x the button
Then put the blower in pairing mode by pressing the button for
5 sec. PAIR and will flash.
OK
mode
5 sec.
5 sec.
Is this sign already visible at the bottom right
on the display, as in the following example?
The radiator is already connected and you can
skip this step.