Vasco RF - Page 21

10 sec.
10 sec.
EN
21
mode
RF pairing cancellation:
a. RF reciever
Press longer than 10 seconds the button of the RF reciever.
b. Blower:
Put the blower in frost protection
mode and press simultaneous
on the button and
on the blower for more than
5 seconds.
Via the blower:
Via the RF remote control:
mode
Put the RF remote control in
frost protection mode and press
simultaneous on the button
and for more then
5 seconds.
When the RF remote control and the blower are not linked anymore, the
symbol disappears on both the LCD screens.
ERROR CODES ON DISPLAY
- Er1: Room temperature sensor defective (interrupted sensor)
- Er2: Room temperature sensor defective (sensor shorted)
- Er3: Blower internal temperature sensor defective (interrupted sensor)
- Er4: Blower internal temperature sensor defective (sensor shorted)
- ErE: Error in electronics
5 sec.
5 sec.