Vathin DVM-A1 - User Manual

Hunan Vathin Medical Instrument Co., Ltd.
User's Manual
Name
User's Manual of Digital Video Monitor
Page
0/31
No.
QP-DMR-DVM-004
Prepared By
Date
Release Date
Controlled
Status
Reviewed By
Date
Effective
Date
Approved By
Date
Competent
Department
R&D
Department
Version No.: A
Revision No.: 0
Distributed To
Release Notes
Version
No.
Modification
Date
Modification
Description
Prepared/
Modified By
A/0
2020.12.11
New Document

Summary

Important Information - Read Before Use

Expected Purpose

Basic Performance

Repair and Refit

Keywords

Dangers, Warnings and Cautions

Applicable Standards

Labels and Symbols

Product Specifications and Recommended Accessories

Operating Environment

Storage and Transportation Environment

Specifications

CHAPTER I PACKING LIST CHECK

1.1. Packing List

Lists items included in the product packaging with quantities and images.

1.2. Optional Accessories

Details optional accessories available for the product.

CHAPTER II DENOMINATION AND FUNCTION

1. Power button

Describes the function and operation of the power button for the device.

2. Power indicator

Explains the status indication of the power supply connection and charging.

3. Microphone

Details the microphone function and its enable/disable setting.

4. Display screen

Describes the touchable display screen used for showing images from the endoscope.

5. WLAM interface

Identifies the interface for connecting to a wide area network.

6. HDMI interface

Specifies the interface for connecting an external high-definition monitor.

7. USB interface 3.0

Describes the USB 3.0 port for connecting external devices like U disks.

8. Power jack

Indicates the DC input port for powering the system.

CHAPTER III HOW TO USE THE PRODUCT

3.1 Preparation, Connection and Inspection

Outlines the necessary steps before using the product, including connection and initial checks.

9. USB 2.0

Describes the USB 2.0 port for connecting to a PC for image display.

10. Reset button

Explains how to reset the product to factory settings using the reset button.

11. Video endoscope cable connector socket

Identifies the socket for connecting the video endoscope cable.

12. Amplification sound hole

Indicates the location for sound amplification.

13. Bracket

Describes the bracket used to support the product on a surface.

3.2 Installation, Preparation and Operation of Vathin Electronic Endoscopes

3.3 Operating DVM-A1 Digital Video Monitor

3.3.1. Power-on:

Details the procedure for turning the product on using the power button.

3.3.2. Basic function interface:

Describes the main interface for operations like photo-shooting and white balance.

3.3.2.1. Patient information:

3.3.2.2. White balance:

3.3.2.3. Photoshooting:

3.3.2.4. Video recording:

3.3.2.5. Storage path:

3.3.3. File Management interface:

3.3.4. System setting interface:

3.3.5 Firmware update

3.3.6 Network setup

3.3.6.1 WiFi setting:

3.3.6.2 LAN setting

3.4 After Use

CHAPTER IV CLEANING, DISINFECTION, STORAGE AND DISPOSAL

4.1 Cleaning

Outlines the procedures and recommended detergent for cleaning the product.

4.2 Disinfection

4.3 Storage

4.4 Disposal

CHAPTER V TROUBLESHOOTING

Appendix 1. Electromagnetic Compatibility

Appendix 2. Warranty and Replacement Policies

Appendix 3. Recommended combinations of equipment

Appendix 4. Information about wifi

Vathin DVM-A1 Specifications

General

Brand	Vathin
Model	DVM-A1
Category	Medical Equipment
Language	English