VAVA Chroma // 10
USING YOUR
PROJECTOR
2
Quick Installation Guide
2.1
PREPARATION
Install the electrical outlet near the equipment. It should be easily
accessible. Take the 4 following items into consideration when installing
the projector:
1) Distance between the projector back and the wall (W1)
2) Height: image width (height) (H1), height between the bottom of the
image and the desk (H2), height of the desk (H3), and the
recommended height of the wall (H4)
3) Surface for placing the projector
You can place the projector on almost any sturdy, flat and level surface,
to project an image.
Dimensions of the desk:
- Mobile desk: W2, H3, and L2
- Immobile desk: W2, H3, L2 and W1 (leave enough space to move the
device on the desk)
4) Image of the projection
The wall for the projection should be larger than the area of your
desired image size.
Wall area: length (L3, ≥L1) x width (H4, ≥H1 + H2 + H3) in the diagram.
To Next Page
Loading...