05/06
Mounting and Removing the Nozzle
① Insert the nozzle into the hole at the top of product. Push the nozzle in vertically.
Adding Water
How to Use
Power On / Off
① To add water, hold the product horizontally, open the reservoir lid, and add water through
the inlet.
② Use clean water for oral and reservoir cleaning. We do not recommend you add
mouthwash, vinegar, saline water, descaling or other chemical agents into the reservoir.
② To remove the nozzle, press the Nozzle Release Button and pull away from the product.
Press the Power Button once to turn on / off the unit. Press the Mode Button to cycle
through Normal, Soft, and Pulse Mode and the corresponding indicators will light up.
21
To Next Page
Loading...