8
IMPORTANT
This unit is equipped with a smart panel that senses your
touch. Heavy pushing of buttons is not recommended.
CHECK the air purier has a lter. Be sure the supplied lter
is properly in place and all plastic is removed before turning
the unit on.
PLACE the air purier on a hard surface such as the oor, a table
or desk. Be sure the grilles are not blocked by other objects,
and there are no candles or ames near the unit.
PLUG IN into nearest standard electrical outlet.
LIGHTLY TOUCH the power button to turn the air purier on.
Touch the power button again to turn the air purier o.
SELECT THE FAN SPEED to select the speed, lightly touch and
release the fan speed button until the desired speed is reached.
ADJUST THE TIMER the unit will turn o once it runs for the
selected hours.
Note: The unit will run continuously if all the timer lights are o.
THE CHECK FILTER LIGHT the lter light will illuminate when the
lter needs to be replaced. Once replaced, touch and hold the button
for several seconds until the lter indicator light goes o.
Note: To order a replacement lter visit vax.co.uk
LIGHTLY TOUCH ION control to switch the ionisation on/o.
Getting started
HOW THE AIR PURIFIER WORKS
An air purier draws in room air from its air inlet, lets the air pass
through the lter that consists of a pre-lter and HEPA lter inside of the
unit, then releases clean puried air from its air outlet. The air purier
repeats this process by moving its internal fan. As air passes through the
HEPA lter, it removes airborne particles such as smoke, dust, pollen, and
other potentially harmful particles which could cause allergies, asthma
and hay fever.
Choosing a Location
To maximize air circulation, position the air purier at least 50cm away
from walls, or any other large objects that could disrupt the airow.
For optimum results close all windows and doors. For more ecient
air treatment, place the unit in a central location and make sure the
control panel can easily be accessed.
To Next Page
Loading...
Need help?
General
