11
support.vax.co.uk
REMOVING AND CLEANING THE POWERED FLOORHEAD BRUSHBAR
Pull the brushbar out from the brushbar
housing.
To remove any threads or hair, slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove.
Clear any dirt/debris from the end caps
and inside the housing of the powered
floorhead.
CLEANING & MAINTENANCE
Refit the brushbar into the powered floorhead. Align the arrow on the brushbar cover
so it points north, firmly push and twist clockwise to lock.
Using a coin, push and turn the brushbar lock anticlockwise to release the brushbar.Press the powered floorhead release
button to remove the powered floorhead
from the machine.
To Next Page
Loading...
