Cleaning the separator
Taking care of your machine
Turn the dirt container
lid anti-clockwise.
to remove.
Tap the separator
against a bin to
remove any dirt
or debris.
Using central grips lift
to remove separator
from dirt container.
Replace the separator cap,
twist clockwise to lock.
Lift to remove the
pre-motor lter out
of dirt container.
Replace separator into dirt container, make sure the
rectangular hole in the dirt container lines up with the
rectangular hole on the separator.
Twist grips clockwise
and remove cap
from separator.
IMPORTANT: Incorrect tting of the separator will reduce suction.
For any stubborn dirt/debris
remaining in the separator,
use a soft brush to remove.
Refi tting the separator
TIP
To Next Page
Loading...
