Don’t over ll the dirt container
to avoid blocking the air ow
through the vacuum cleaner.
CAUTION
Cleaning the shroud
Taking care of your machine
Rinse both dirt container and shroud under water
(Max 40°C). Leave to dry for 24 hours or until fully
dry before placing back in the machine.
IMPORTANT: The shroud cannot be removed from the dirt container.
Cleaning the pre-motor lter
Press dirt container release
button and lift to remove.
Leave to dry for 24
hours or until fully dry
before placing back in
the machine.
Line up the pre-motor lter frame with dirt container,
push into place.
If the pre-motor lter is not correctly tted the pre-
motor latch will prevent the dirt container from locking
into place.
Tap the lter frame and
foam over a bin to remove
any dirt/debris.
Remove the pre-motor
lter together with frame
and foam.
Rinse both the frame
and foam under water
(Max 40°C).
IMPORTANT: Do not wash the pre-motor lter in the washing machine or dishwasher.
For best cleaning results clean the pre-motor lter every time the dirt container is emptied.
To Next Page
Loading...
Need help?
General
