Vax CCQSASV1P1 User Manual

Assembling your machine
Insert the end of the hose
into the unit. Ensure the
hose has clicked into place.
Insert the handle into the
telescopic extension tube.
Press the button on the
telescopic extension
tube and adjust to the
required length.
Insert the other end of
the telescopic tube into
the oorhead until it
clicks into place.
Getting to know your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting started
Name Vax Air Series
Voltage See rating label on machine for details
Wattage See rating label on machine for details
Cord length 6m - 8m
Weight 4.9 kg - 5.5kg
Technical Specication
Subject to technical change without notice.
Accessories & Consumables
To purchase consumables and accessories, please visit vax.co.uk
Filter Kit (Type 95)
1-1-134231
3-in-1 Tool
1-9-130815
Upholstery Tool (Type 6)
1-9-132116
TurboTool (Type 6)
1-1-134419
Cord rewind button
Bin release button
Carry handle
Power On/O button
IMPORTANT: The condition of the lters aects the performance of your machine. Please check and clean lters
periodically (depending on the level of use). For full cleaning instructions, see ‘Taking care of your machine’.
Before you begin cleaning
• Always switch o and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing
and emptying the dirt container.
• The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does overheat the thermostat
will automatically turn the vacuum cleaner o. If this happens, switch the vacuum cleaner o and unplug from electrical
socket. Remove and empty the dirt container and also check the vacuum cleaner for blockages. Allow the vacuum cleaner
to cool for approximately 1 hour (if you have cleaned the lters please wait 24 hours for the lters to fully dry before putting
back into the vacuum).
• Pre-motor lter requires cleaning at least every 3 months.
• If the vacuum cleaner is blocked, switch o and unplug before removing the blockage.
• When using the accessories always make sure the brushbar is switched to the o position.
IMPORTANT: The base of the vacuum cleaner should always be positioned at on the oor when starting and in use.
The dirt container should be locked into place before lifting the vacuum cleaner by the carry handle.
Hose inlet
Dirt container
Dirt container lid
Inner cyclone
Inner wheel and
lter housing
Floorhead parking slot

Vax CCQSASV1P1 Specifications

General

Brand	Vax
Model	CCQSASV1P1
Category	Vacuum Cleaner
Language	English