Vax Compact Power CWCPV011 User Manual

10
WARNING: Always switch off the machine and unplug from the mains before carrying out any maintenance or troubleshooting.
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the machine.
Hold the dirty water tank
over a sink and pull to
open the quick pour spout.
To re-fit, tilt the dirty water
tank and line the back
of the tank up onto the
machine. Drop the front of
the tank forward until the
dirty water tank release
clip clicks into place.
Empty the dirty water over
the sink. Rinse the dirty
water tank under water
(max 40°C) to remove
dirt/debris.
IMPORTANT: Empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored
in the tanks between uses.
Emptying and cleaning the dirty water tank
Cleaning the filter
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the machine.
Wipe the filter located on
the machine underneath
the dirty water tank to
clear any dirt/debris.
To re-fit, tilt the dirty water
tank and line the back
of the tank up onto the
machine. Drop the front of
the tank forward until the
dirty water tank release
clip clicks into place.
MAINTENANCE AND CLEANING

Vax Compact Power CWCPV011 Specifications

General

Brand	Vax
Model	Compact Power CWCPV011
Category	Cleaning Equipment
Language	English