Taking care of your machine
Cleaning the lter and separator
Retting the separator, lter and dirt container
Tap the mesh lter and separator 
over a bin to remove any dirt/
debris. Using a dry cloth wipe 
away any remaining dirt/debris.
Line up the arrows  
around the side of the 
separator with the arrows 
on the handheld. Twist 
the separator clockwise 
locking it into place.
Ret the mesh lter  
with the rim of the  
lter at the top. Twist  
the lter clockwise  
and lock into place.
Tilt the dirt container 
slightly forward and line 
up onto the handheld.
When the dirt 
container is seated 
on the handheld push 
the dirt container 
backwards to lock 
into place.
CAUTION: Incorrect tting of the separator and lter will reduce suction.