EasyManuals Logo

Vax Dual Power W86-DP-B Quick Manual

Vax Dual Power W86-DP-B
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Warning: Always switch o and unplug the carpet washer from the electrical outlet before assembling, lling and emptying the clean water tank,
emptying the dirt water tank, or before connecting/disconnecting the attachments.
Important: Carpets should be dry vacuumed thoroughly before washing.
Caution: The carpet washer is a very powerful unit. Before plugging the cord into the electrical outlet, make sure all controls on the unit
are turned o. Hold the carpet washer rmly when starting and in use.
Important: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the
unit o. Should this occur, unplug the carpet washer from the electrical outlet and turn o the switch. Check the hose for blockages.
Clean the lters. Allow the unit to cool for approximately one hour. To re-start the machine, plug it into an electrical outlet and switch it back on.
What to do if it goes wrong Getting in touch
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the carpet washer before calling.
The plug may not be fully pushed into the electrical socket.
Check the fuse in the plug if this needs replacing, always
replace with a 13amp fuse
Make sure the clean water tank is tted securely
The clean water tank valve may be stuck, hold the clean water
tank over the sink and press the valve underneath to release
Check the power brushes for blockages and clear
Check the belt Go to ‘Replacing the belt or brushbars’
The oat in the dirty water tank may have been activated.
Empty the dirty water tank wait for the oat to settle before
re-starting your carpet washer
Check the dual spin power brushes for blockages and clear
The dirty water tank may not be tted correctly, also make
sure the lid is pushed down securely
Check the nozzle for blockages and clear
SolutionProblem
Why won’t my carpet
washer turn on?
Why won’t the solution/
clean water dispense?
Why won’t my carpet
washer pick up?
Why won’t the
brushes spin?

Other manuals for Vax Dual Power W86-DP-B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax Dual Power W86-DP-B and is the answer not in the manual?

Vax Dual Power W86-DP-B Specifications

General IconGeneral
ModelW86-DP-B
CategoryVacuum Cleaner
Power SourceCorded
Power800W
TypeCarpet Cleaner
Special FeaturesDual
Cord Length8 m

Related product manuals