Using the wash tool
Press trigger to
release solution.
Release the solution
trigger and pull wash tool
backwards over treated
area to pick up spills.
NOTE: The clean water tank will need to be lled with solution and water before use.
TIP
For best results apply solution
on the forward stroke and
release the trigger to recover
on the backward stroke.
Using your machine
Remove the reach
hose from the
accessory bag.
Plug the solution tube,
from the reach hose, into
the solution port.
Plug the reach hose
into the front of the
cleaner.
Turn the machine on.
To Next Page
Loading...
