Hard water lter should
be replaced every 3-6
months or if discoloured
and darkened.
Changing the hard water lter
Remove water tank to
access the hard water lter.
Pull hard water lter
to remove.
New lter
(beige/cream colour).
IMPORTANT: Don’t operate the steamer without hard water lter in place. The condition of the lter aects the
performance of your steamer, check and change lter periodically. If you live in a hard water area the lter will
discolour or darken over time. Depending on water hardness and frequency of use, the lter should be changed
every 3 to 6 months (or if the lter has discoloured).
Taking care of your machine
Cleaning the microbre pad
Using your foot, hold the
corner of the microbre
pad down, lift steamer
to remove.
All cleaning pads are
machine washable
(Max 40°C) allow to fully
dry before use.
MAX
!
40˚C
IMPORTANT: Never use bleach or fabric softener when washing the microbre pad. Always allow the steamer to fully
cool down before removing the microbre pad.
To Next Page
Loading...
Need help?
General
