EasyManuals Logo
Home>Vax>Vacuum Cleaner>ECR2V1P

Vax ECR2V1P Troubleshooting Guide

Vax ECR2V1P
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Unplug the cap and empty the tank
Rinse with warm water
Allow the tank time to dry
Is there a high pitched noise coming from the machine?
The machine has a float in the dirty water tank that is designed to rise with the
level of the water. However, if the machine is jolted, or there is a large amount of
foam in the tank, the float may rise to the top. The rising float will block the
suction and the machine will make a high pitched noise.
To return the float to its original position, simply switch the machine off, allow it
to drop down and then try again
No water delivery through the main machine?
Remove and fill the clean water tank
Hold the clean water tank over the sink and press the valve at the bottom of the
tank

Other manuals for Vax ECR2V1P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax ECR2V1P and is the answer not in the manual?

Vax ECR2V1P Specifications

General IconGeneral
BrandVax
ModelECR2V1P
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals