www.vax.co.uk
4
assembly/ operation
3. Assembly
Putting your cleaner together
Slide the upper handle down onto the unit. The handle
will click and lock in place.
Run the mains wire above the upper cord hook and
secure with the cord clip (Fig 3/1).
4. Operation
IMPORTANT: Turn off when emptying and filling
the tanks and performing any maintenance.
Grasp the solution reservoir under the handle and press
the handle release lever in (Fig 4/1).
Tilt the solution reservoir away from the cleaner and
remove (Fig 4/2).
Unscrew the cap from the bottom of the solution
reservoir (Fig 4/3).
Pour the correct amount of Vax AAA Solution as directed
into the clean water tank
Fig.3/1
Fig.4/1
Fig.4/2
Fig.4/3
Fig.4
Fig.4
Fig.4
To Next Page
Loading...
Need help?
General
