Vax ONE PWR CORDLESS GLIDE Series User Manual

10
support.vax.co.uk
CLEANING & MAINTENANCE
ALWAYS SWITCH OFF THE MACHINE AND REMOVE THE BATTERY BEFORE CARRYING OUT ANY
MAINTENANCE OR TROUBLESHOOTING.
IMPORTANT: Empty and rinse out the water/solution tank and dirty water tank and leave to air dry
before refitting.
EMPTYING THE DIRTY WATER TANK
To re-fit, tilt the dirty water tank and line the front of the
tank up onto machine. Push back until it clicks into place.
Press down the dirty water tank release
button and pull the tank to remove.
Hold the top of the dirty water tank lid and pull upwards to remove.
Empty the dirty water over a sink. Rinse
the tank and separator under water
(max 40°C) to remove dirt/debris.
40°C
MAX
To refit, line up the separator tab with the
lid tab and twist anticlockwise to lock.
Twist the separator clockwise to release
from the lid.

Vax ONE PWR CORDLESS GLIDE Series Specifications

General

Brand	Vax
Model	ONE PWR CORDLESS GLIDE Series
Category	Vacuum Cleaner
Language	English