EasyManua.ls Logo

Vax ONEPWR Spotless Go CLCW-MSKS

Vax ONEPWR Spotless Go CLCW-MSKS
12 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
support.vax.co.uk
TROUBLESHOOTING
THERE IS AN ACCESSORY MISSING
Check the contents on the back of the box.
WHY DOES THE MACHINE HAVE NO POWER?
The battery is not tted correctly. See ASSEMBLY page 6.
The battery has no charge. See CHARGING THE BATTERY page 6.
WHY WON’T THE SOLUTION/WATER DISPENSE?
Squeeze the trigger on the hose to release solution and water mix.
Make sure the water/solution tank is tted securely. See OPERATION page 7.
The water/solution tank valve may be stuck, hold the water/solution tank over the sink
and press the valve underneath to release.
The water/solution tank is empty. Rell the tank. See OPERATION page 7.
WHY WON’T THE SPOT WASHER PICK UP?
The oat in the dirty water tank may have been activated. Empty the dirty water tank
and wait for the oat to settle before re-starting your machine.
Check the hose for blockages and clear. See CLEANING AND REMOVING BLOCKAGES
FROM THE HOSE page 11.
Check the nozzle for blockages and clear. See CHECKING FOR BLOCKAGES page 10.
The dirty water tank may not be assembled correctly or the lid may not pushed down
securely. See EMPTYING AND CLEANING THE DIRTY WATER TANK page 9.
Check the nozzle is correctly tted. See CHECKING FOR BLOCKAGES page 10.
Check the lter located under the dirty water tank for dirt and debris.
See CLEANING THE FILTER page 10.

Related product manuals