10
USING YOUR MACHINE
Operation
Press the handle release
pedal and pull the handle
backwards to recline
the machine. The brushes
will start rotating.
Slowly push the machine
forwards. Water/solution
will automatically
dispense.
Plug the machine into the
mains and press the
On/Off pedal to switch on.
The mode indicator will
illuminate DRY on the
backward stroke.
Slowly pull the machine
backwards to pick up the
water/solution.
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing. For heavily soiled areas, it may be necessary to
repeat the cleaning process. Make criss-crossing strokes across the original pattern and overlap with each pass. Do not over
saturate the carpet.
For a dryer finish, press
the dry only button to
stop the water delivery.
Continue using dry strokes
until little water is visibly
passing through the nozzle.
The mode indicator will
illuminate WASH on the
forward stroke.
CAUTION: The brushbars constantly rotate when switched on and the machine is reclined. Never use on one spot for an
extended period of time as the brushbars may damage the floor surface.
To Next Page
Loading...
