Vax Power 6

Assembling your vacuum cleaner
Keep you Vax like new
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Getting startedGetting to know your machine
Name Power 6
Model VX71
Voltage 220-240V ~ 50Hz
Wattage 2000W
Cord length 7m
Weight 5.4kg
Technical Specication
Subject to technical change without notice.
Filter pack*
VCP6BFLT
Accessories & Consumables
*To purchase consumables and accessories, please visit vax.com.au
CAUTION: Always switch o the vacuum cleaner before connecting or disconnecting the hose/attachments,
or removing and emptying the dirt container.
IMPORTANT: The condition of the lters aects the performance of your machine. Please check, clean and replace
lters periodically (depending on the level of use). For full cleaning instructions, see “Cleaning the pre-motor lter”
and “Cleaning the post-motor lter”.
IMPORTANT: Do not use the vacuum cleaner with blocked lters and without all of the lters in place.
NOTE: The Turbobrush, hard oor tool, crevice tool, upholstery tool and dusting brush can all be attached directly
to the telescopic tube or hose handle.
Hard oors
Carpets
Double
Insulated
This product
meets applicable
regulatory
requirements
Indoor
Use
Only
Read
Instructions
Carry handle
Cyclone separator and shroud
Dirt container lid
Hose connector
Variable power dial
On/o button
Dirt container
Cord rewind button
Wheel