Assembling your pressure washer
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE.
Attach both wheels
and push until they click
into place.
Attach the hose connector
to water inlet by turning
clockwise until tight.
To attach the handle into the top
of the pressure washer, align
the handle with the screw holes
making sure not to trap the
solution tube. Slide together and
insert 2 screws and turn clockwise
to tighten.
Always make sure the pressure washer and water supply is o before connecting or disconnecting the hose
and accessories.
To purchase consumables and accessories, please visit vax.co.uk
To Next Page
Loading...
Need help?
General
