9
Using Rinse mode
Turn the wash/rinse
dial to rinse. Only water
is released to remove
solution residue.
Plug into the mains,
press the on/o pedal
to switch on.
Press the recline pedal
and pull the handle
backwards.
Squeeze the trigger to
release solution and
water mix.
For best results apply
water/solution on the
forward stroke and
release the trigger to pick
up water/solution on the
backward stroke. Follow
with a slow additional dry
stroke without the trigger
pressed for a dryer nish.
For best results apply
water on the forward
stroke and release the
trigger to pick up water
on the backward stroke.
Follow with a slow
additional dry stroke
without the trigger
pressed for a dryer nish.
TIP
For best cleaning results use slow straight
parallel strokes. Intermittent dry forward
strokes will increase water pick up.
Using your machine
To Next Page
Loading...
Need help?
General
