Using your machine
Using rinse mode on the hose
Turn the wash/rinse
dial to rinse. Only water
is released to remove
solution residue.
Press the trigger on the
hose to release water.
Squeeze the trigger
on the forward stroke,
release the trigger on
backward stroke to
pick up water. Follow
with an additional dry
stoke without the trigger
pressed for a dryer nish.
Press the trigger on the
hose to release solution
/water.
Squeeze the trigger
on the forward stroke,
release the trigger on the
backward stroke to pick
up solution/water. Follow
with a slow additional dry
stoke without the trigger
pressed for a dryer nish.
To remove the tool, lift and
push the tool clip over the
tab at the end of the hose
and pull to remove.
To Next Page
Loading...
