Using your machine
Using Rinse mode
Using your machine
Turn the wash/rinse
dial to rinse. Only water
is released to remove
solution residue.
Plug into the mains,
press the on/o pedal
to switch on.
Press the recline pedal
and pull the handle
backwards.
Squeeze the trigger to
release solution and
water mix.
For best results apply
water/solution on the
forward stroke and
release the trigger to pick
up water/solution on the
backward stroke. Follow
with a slow additional dry
stoke without the trigger
pressed for a dryer nish.
For best results apply
water on the forward
stroke and release the
trigger to pick up water
on the backward stroke.
Follow with a slow
additional dry stoke
without the trigger
pressed for a dryer nish.
TIP
For best cleaning results use slow straight
parallel strokes. Intermittent dry forward
strokes will increase water pick up.
To Next Page
Loading...
