Vax Swift V-075 User Manual

8
EEC STATEMENT OF COMPLIANCE
Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declares that the
products V-075/V-075S bagged cylinders are manufactured in compliance with
the following Directives:
Safety: 73/23/EEC Low Voltage Directive
EMC: 89/336/EEC Electromagnetic Compatibility Directive
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.
Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire WR9 0QH, UK
email: info@vax.co.uk - website: www.vax.co.uk
V-075_Artwork.qxd 30/3/06 12:43 Page 1

Vax Swift V-075 Specifications

Power

voltage	240V ~50Hz
wattage	2000W

Capacity and Filtration

capacity	2.9 litres
filters	Fibre pre-motor filter, Pleated paper post-motor filter

Weight and Dimensions

cord length	4.65m
weight	6.95kg

Summary

Parts Overview

Diagram

Visual representation of the vacuum cleaner components.

Accessories

Safety Information

Motor Thermostat

Details the automatic overheat protection mechanism for the motor.

How to Assemble

How to Operate

Dirt Container & Filters: Removal & Replacement

Post Motor Filter

Instructions for removing and replacing the filter located after the motor.

Pre Motor Filter

Instructions for removing and replacing the filter located before the motor.

Clearing Blockages

Troubleshooting

Cleaner won't run

Lists causes and solutions for the vacuum cleaner not powering on.

Vacuum cleaner won't pick up/loss of suction

Addresses issues related to reduced or absent suction power.

Dust escaping from the vacuum cleaner

Identifies reasons for dust leakage from the unit.

UK Service & Help

Technical Specification