Vax V-028 User Manual

11
F
ilters
To empty dirty water tank, grasp handle with one hand
and nozzle with the other and empty into sink. To
clean, rinse tank thoroughly with clean water
and let dry.
Fig.9/4
Remove filter from rear of dirty water tank lid.
Fig.9/5
Rinse dirty water tank and filter with warm tap water.
Wipe and let dry thoroughly before storing to prevent
mildew from forming.
NOTE: Do not use any chemicals when cleaning.
Fig.9/6
Push handle down until it latches.
NOTE: Do not store cleaner with solution in reservoir
or dirty water in dirty water tank. Mineral deposits and
mildew can form which will affect the performance of
the carpet washer
.
Fig.9/8
While making sure the front of the dirty water tank is
resting on the base, place the rear of the tank into the
base of the cleaner.
Replacing dirty water tank in base
of carpet washer
Fig.9/7
Vax V-028 Range.qxd 27/4/07 13:26 Page 11

Vax V-028 Specifications

General

Brand	Vax
Model	V-028
Category	Vacuum Cleaner
Language	English