To Next Page

To Previous Page

ow to Operate/Carpet Cleaning

Fill measuring cap with solution (approximately

4 capfuls). Pour into clean water tank.

NOTE: Use only Vax AAA Carpet Cleaner solution.

Using other cleaning solutions may cause excess

foaming. Excessive foam will cause the float to shut off

the carpet washer prematurely. Using other solutions

will void the warranty.

Fill remainder of clean water tank with warm (max

40ºC) tap water. Replace cap.

7. Carpet Cleaning

Place bottom of clean water tank into carpet washer

and r

otate top into position until the clean water tank

Latch snaps into place.

Fig.7/1

Fig.7/3

Fig.7/2

Plug cord into electrical socket. Step on the power on/off

pedal to turn cleaner on.

NOTE: Never leave unit unattended with power on. Turn

off when emptying and filling tanks. Do not oversaturate

the carpet.

Step onto handle release pedal to put into cleaning

position.

Fig.7/4

Fig.7/5

While depr

essing solution spray trigger, pull carpet

washer in backwar

d motion. Release trigger and push

unit forwar

d in same path to remove dirty water and

solution fr

om carpet. (For heavily soiled areas, repeat

if necessary).

Vax V-028 Range.qxd 27/4/07 13:26 Page 8

Vax V-028 User Manual

Questions and Answers: