Vax V-028 User Manual

9
Fig.8/1
IMPORTANT: For best cleaning results use a steady,
moderate, forward and backward motion.
IMPORTANT: If the sound of the motor changes to a
high pitch, this indicates the dirty water tank is full and
must be emptied.
8. Accessories
(Model: V-028/V-028PT/V-028PET only)
Put carpet washer in its upright position, then turn off.
Remove the dirty water tank door from the top of the
dirty water tank.
For cleaning upholstery and stairs
Fig.8/2
C
arpet Cleaning/Accessories
Connect the hose
solution tube into
the fitting on the
lower left side
of handle facing
carpet washer.
Fig.8/4
Step on power on/off pedal to turn cleaner on. While
depressing solution spray trigger, pull attachment in
backward motion. Release trigger and push
attachment forward in the same path to remove dirty
water and solution from upholstery. (For heavily soiled
areas, repeat if necessary.)
NOTE: Do not oversaturate the upholstery.
IMPORTANT: For best cleaning results use steady,
moderate, forward and backward motion. Make sure
upholstery is dry before use.
NOTE: If the dirty water tank door is not replaced,
there will be no suction through the nozzle and the unit
will not operate pr
operly.
Fig.8/5
BACK
VIEW
Upholstery / stair attachment
Fig.8/6
Power Wash Brush usage
(Model: V
-028PET only)
Insert the up-
holstery/stair
hose adaptor into
the opening on
top of the dirty
water tank.
Fig.8/3
Vax V-028 Range.qxd 27/4/07 13:26 Page 9

Vax V-028 Specifications

General

Brand	Vax
Model	V-028
Category	Vacuum Cleaner
Language	English