Vax V-028 User Manual

P
re-treating your Carpet
6
5. Pre-treating your Carpet
(Model: V-028MPT/V-028PT only)
Grasp the clean water tank under the handle while
pressing the clean water tank latch. Tilt the clean
water tank away from the carpet washer and remove.
Unscrew the measuring cap from the back of the
clean water tank.
C
lean water
t
ank handle
Clean water
t
ank latch
Fig.5/1
Fig.5/2
Fig.5/3
Fill the remainder of the clean water tank with warm
(max 40
o
C) tap water. Replace the cap.
Place the bottom of the clean water tank into the
carpet washer and rotate top into position until the
clean water tank latch snaps into place.
Attach the pr
e-tr
eatment wand to the water supply
port and pr
ess firmly until it locks into place.
Fig.5/4
Fig.5/6
Fig.5/5
BACK
VIEW
Fill the measuring cap with the pr
e-treatment solution
(approximately 3 capfuls per litre of clean water).
Pour into the clean water tank.
Vax V-028 Range.qxd 27/4/07 13:26 Page 6

Vax V-028 Specifications

General

Brand	Vax
Model	V-028
Category	Vacuum Cleaner
Language	English