Getting started
Assembling your 2-in-1 vacuum cleaner
Line up oorhead with
main body, push rmly
into place.
Line up handle with main
body and lower into place.
Insert screw into back of the
handle and tighten with a
cross head screwdriver until
handle is secured into place.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Charging your 2-in-1 vacuum cleaner
Plug the charger into the
back of the docking station
and plug into mains.
Slide the vacuum onto the
docking station. The LED
indicator will initially turn green,
then illuminate red to indicate
that it is in place and charging.
Once fully charged (8-10)
hours the LED indicator
on the On/O button will
illuminate green and turn o
to power saving mode.
NOTE: Charging will be required before rst use. Initial charge requires 10 hours.
When the vacuum needs recharging the
LED light on the On/O button will ash
red and the machine will cut out.
To Next Page
Loading...
