WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling,
opening or removing and replacing the HEPA dust bag, or before connecting/disconnecting the attachments.
CAUTION: The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket, make
sure the switch is in the ‘o’ position.
IMPORTANT: If the inlet, is blocked, switch o the vacuum cleaner and remove the blockage(s) before
re-starting the vacuum cleaner.
IMPORTANT: Vax recommends the use of Residual Current Device Rating of 30mA or less.
IMPORTANT: It is very important that the HEPA dust bag is replaced when full to get maximum performance
from your vacuum cleaner. Only use recommended Vax disposable HEPA dust bags.
NOTE: If the supply cord is damaged it must be replaced by the manufacturer, or a similarly qualied person in
order to avoid hazard, or invalidating the warranty.
DAMAGE TO THE VACUUM CLEANER CAUSED AS A DIRECT RESULT OF NOT ADHERING TO THE GENERAL
SAFETY INFORMATION AND THE INSTRUCTIONS IN THIS USER GUIDE INVALIDATES THE WARRANTY
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
General Safety Information
4
vax.com.au
vax.co.nz
To Next Page
Loading...
