Using your machine
Turning your machine On and Off
Slide the power switch to the ON position. When completed, slide the power switch to the
OFF position.
NOTE: Empty and clean the unit and lter after
each use or after large pickups when the unit
becomes full.
TIP: The power switch must be in the OFF
position for the unit to charge.
PU SH
FLIP
Quick- ip crevice tool
Flip crevice tool out to line up with nozzle then
push in until secured in place.
To store crevice tool: gently pull the tool away from
the dust cup and ip the tool up towards the unit
& press down until you feel it lock into place.
PULL
FLIP
To Next Page
Loading...
