Remove the long reach hose from the accessory bag.
Lift hose connector door and plug the long reach hose
into the front of the cleaner.
Plug the solution tube,
from the long reach hose,
into the solution port.
Twist lock to secure.
Using your machine
Turn the machine on. Press trigger to
release solution.
Pull wash tool over treated
area to pick up liquid.
Using the wash tool
TIP
IMPORTANT: Do not over saturate your upholstery. The clean water tank will need to be lled with solution
and water before use.
For best results apply solution
on the forward stroke and
release the trigger to recover
on the backward stroke.
To Next Page
Need help?
General
