Vax W87-DV-B - Page 4

Recline pedal
Max Extract pedal
Stretch hose
caddy
Power cable hook
Power cable
Wheels
Hose/Stretch hose
Name Dual V Advance
Code: W87-DV-B
Voltage: 220-240V~50Hz
Wattage: 1350W
Clean water tank capacity: 3.7L
Dirty water tank: 3.2L
Cord length 10m
Weight 10.3kg (depending on model)
Hose length W87-DV-B – 2.6m
W87-DV-R – 4.2m
W87-DV-T – 4.2m
Technical Specication
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
Getting to know your machine
Handle grip
Trigger (hidden)
SpinScrub caddy
SpinScrub wash tool
On/O switch
Mode selector switch
Clean water tank
Dirty water tank
carry handle
Carry handle
Dirty water tank
Hose connection port
Nozzle
Edge Cleaners
Detergent tube
connector port
SpinScrub brushes
(hidden)
Clean water tank
release button
Getting started
Do not saturate your carpet.
• Test for colourfastness – Wet a white absorbent cloth with the detergent. In a small hidden area of your carpet/rugs
/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with white
paper towel or cloth. If your carpet has more than one colour, check all colours.
• Test your carpet/rugs/upholstery – Run the carpet washer over a small hidden area. If no pile distortion occurs
continue cleaning.
• When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved, place
aluminium foil or wax paper under the legs. This will prevent wood nishes from staining your carpet. Pin up furniture
skirts and curtains.
• When using the carpet washer, basic safety precautions should always be observed and don’t over saturate
your carpets.
• Only use Vax carpet detergent. Using other detergents may cause excess foaming and will invalidate your guarantee.
• The clean water tank should only be lled with warm water (max 40C). Filling the clean water tank with hot/boiling
water will damage your machine and invalidate the guarantee. This is a powerful carpet washer, before plugging in
make sure all controls are turned o and hold carpet washer rmly when starting and during use.
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.