Looking After Your Machine – Filters
7
1
2
3
Hold the dirt container and twist
the lid anti-clockwise.
Remove the inner separator from
the container.
Lift the lid to reveal the
pre-motor lter.
Remove the cap from the
inner separator.
Lift out the pre-motor lter.
Dislodge any excess dirt by gently
tapping the inner separator upside
down above a bin.
4
5
TAP
6
Cleaning the shroud
1
2
3
Post motor lter is located in the
right side wheel. Hold the centre
of the wheel and twist wheel
cover anti-clockwise.
With the wheel cover o
the post-motor lter is
easily removed.
Tap all excess dirt o the lter.
Do not wash.
Cleaning the HEPA media post-motor lter
To Next Page
Loading...
