Common troubleshooting
1. Connection exception
a. Please check whether TX / RX power supply is normal
b. When RX is always displayed as link, please restart TXRX /
switch to a clean frequency point
2. Display abnormal problems
a. Please check whether the video source is connected to
HDMI in correctly
b. Please check whether the signal format can be normally
displayed on the OLED screen
3. Video picture jam
a. Please check whether the signal quality displayed by the
receiver is good. If the signal is weak, please switch the
frequency point or shorten the wireless connection distance
b. If it is impossible to determine which channel has low
environmental interference, please restart TX and select a
cleaner channel for automatic frequency sweep
To Next Page
Loading...