VBC Racing Lightning 10M 235 User Manual

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT
1/10 SCALE ELECTRIC COMPETITION CAR KIT
E
INSTRUCTIONS MANUAL
5
Thank you for purchasing VBC Racing product.
This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.
Before your assembly, sand the chassis edges.
Things that we should remind you.
Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.
Need help or support.
If you need help or you would like to leave us a comment,
please email to our support team: support@vbc-racing.com or
visit our web site www.vbcracing.com

VBC Racing Lightning 10M 235 Specifications

General

Brand	VBC Racing
Model	Lightning 10M 235
Category	Motorized Toy Car
Language	English

Summary

Graphite Edges Protection Procedure

Chassis Edge Preparation

Sand chassis edges and apply CA glue for reinforcement.

Pivot Brace Assembly Part 1

Assembling Pivot Brace Components

Details the assembly of the pivot brace using specific screws and balls.

Pivot Brace Assembly Part 2

Connecting Pivot Brace to Chassis

Guides the attachment of the pivot brace assembly to the main chassis.

Rear Bulkhead Assembly Part 1

Mounting Motor Mounts to Chassis

Attaching aluminum motor mounts to the chassis using flathead screws.

Chassis Brace Assembly

Installing Chassis Braces and Standoffs

Securing chassis braces and aluminum standoffs to the chassis structure.

Rear Shock Mount Assembly

Attaching Rear Shock Mount Plate

Mounting the graphite rear shock mount plate to the chassis.

Side Damper Tube Assembly

Assembling Side Damper Tubes

Guides the assembly of the side damper tubes with turnbuckle cups and shafts.

Front Suspension Assembly

Upper Arm Mount Active Caster Setup

Details the setup for the upper arm mount's active caster adjustment.

Lightning 12 Front Upper Arm Assembly

Guides the assembly of the front upper arm components.

Front Suspension Assembly Details

Caster Adjustments and Spacers

Explains caster angle adjustments using various spacers.

Ball Differential Assembly

Differential Components and Assembly

Details the parts and steps for assembling the ball differential.

Servo and Top Plate Assembly

Servo Mounting and Linkage Setup

Guides the installation and connection of the servo and related components.

Battery Placement Options

Adjustable Battery Position Setup

Details transversal and inline battery placement options and related hardware.

Shock Assembly

TBB Shock Assembly Procedure

Provides a detailed, step-by-step guide for assembling the TBB shock absorbers.

Front Bumper Assembly

Body Post and Bumper Installation

Guides the installation of the front bumper and body posts with height adjusters.

Installing Front Bumper

Front Bumper Installation Steps

Details the process for installing the front bumper using specific hardware.

Rear Body Post Assembly

Body Post and Support Installation

Guides the assembly of the rear body posts and height adjuster supports.

Install Wheels and Motor

Wheel and Motor Mounting Procedure

Instructions for mounting the wheels and installing the motor onto the chassis.

Install Motor and Electronics

Motor and Electronics Installation

Guides the installation of the motor and electronic components onto the chassis.

Install Electronics

ESC and Receiver Installation

Details the process for installing the Electronic Speed Controller (ESC) and receiver.