Why is my VDO MM 2700 Car Video System monitor not functioning?
If your VDO Car Video System monitor isn't working when you switch on the ignition, check the fuses (both in the vehicle’s cigarette lighter plug and the red connecting cable) and ensure all connections are properly secured, referring to the installation instructions for guidance.
What to do if the VDO MM 2700 picture is too dark or bright?
If the picture on your VDO Car Video System appears too dark or bright, try the following: * Adjust the brightness in the OSD menu. * Check the dimmer setting in the OSD menu. * Verify the settings of the connected source.
What to do if there is no sound on VDO MM 2700 Car Video System?
If you can't hear any sound on your VDO Car Video System, make sure the volume is set appropriately on the monitor. Also, check the mute setting in the OSD menu to ensure it is not enabled.
What to do if the hue of the navigation display appears corrupted on VDO Car Video System?
If the hue of the navigation display on your VDO Car Video System looks corrupted, try adjusting the TINT set value via the OSD menu. You may also need to change the “Sync. in green / No Sync. in green” setting in the “Settings” menu of the navigation computer.
What to do if navigation system is in stand-by mode but the monitor backlighting is still switched on for VDO Car Video System?
If your VDO Car Video System's navigation system is in standby mode but the monitor backlighting remains on, switch off the monitor using the on/off button.
How to fix distorted picture on VDO Car Video System?
If the picture on your VDO Car Video System appears slightly distorted, connect the earth lead of the monitor to another suitable earthed point to avoid earth loops, such as the connection point of the video source.
Read operating instructions carefully for reliable operation and durability. Keep instructions for future owners.
Important safety information for safe use. Failure to observe may cause material damage or personal injury.
Details the MM 2700's capabilities, including 7-inch TFT-LCD, resolution, connectivity, and playback modes.
Identifies and explains the functions of the buttons and ports located on the monitor itself.
Details the functions of each button on the infrared remote control for operating the monitor.
Instructions on how to turn the monitor on and off using the monitor or remote control.
Guide on adjusting the volume using the monitor buttons or the remote control.
Steps for calling and adjusting settings via the On-Screen Display (OSD) menu.
Crucial safety and installation guidelines, including requirements for trained personnel and vehicle compatibility.
Lists all items included in the complete installation kit for the MM 2700 monitor.
Step-by-step guide for connecting the monitor to power and AV sources.
Details on how to perform a permanent installation by removing the cigarette lighter plug.
Information on connecting the monitor's remote-control output to compatible DVD players.
Lists navigation computers and multimedia interface boxes compatible with the MM 2700.
Instructions for integrating the monitor into headrests using the supplied installation bracket.
Step-by-step guide on how to safely detach the monitor from its installation bracket.
Common issues, their possible causes, and remedies for the MM 2700 monitor.
General| Touch Screen | Yes |
|---|---|
| Bluetooth | Yes |
| USB | Yes |
| SD Card Reader | Yes |
| DVD Player | Yes |
| Radio Tuner | Yes |
| Rear View Camera Input | Yes |
| Steering Wheel Control | Yes |
| Resolution | 800 x 480 pixels |
| GPS Navigation | No |
| Screen Size | 6.2 inches |
| Supported Media Formats | MP3, WMA, AVI, JPEG |
To Next Page