Vdwall LVP515 series User Manual

Address:5B, building C,building C,Nanshan Hi-tech park,Nanshan District,Shenzhen City,
Website:www.videowall.cn TEL
：
+86-755-2675 0210 FAX
：
+86-755-2675 0185
LVP515 series of Quick Guide
LVP515 serial quick user guideV1.0
In order to make sure users can quickly use LVP515 serial LED video processor, we prepared
the<LVP515 serial quick user guide>. About LVP515 deeply setup, adjustment and operation,
please refer to <LVP515 serial user manual>.
Front and rear panel button introduction
LVP515 supports 4 video signal inputs as below：
port
Description
V1、V2
2 *PAL/ NTSC composite video input
S-Video
1 * PAL/ NTSC light color separation video input
VGA
1 * analog signal input of computer
DVI
1 * computer digital signal input
HDMI
1 * Digital HD signal input
EXT.
1 * extension signal input
Note: EXT. interface: LVP515 1 * VIDEO, LVP515S 1* SDI/HD-SDI.

Vdwall LVP515 series Specifications

General

Splicing Function	Yes
PIP/POP	Yes
Control Method	RS232
Ports	HDMI, DisplayPort
Power Input	AC 100-240V

Summary

Front and Rear Panel Introduction

Front Panel Overview

Details the LCD screen, input select, parameter setup knob, function buttons, and power switch on the front panel.

Rear Panel Overview

Describes the AC power jack, input/output ports, sending card slots, audio, and control ports on the rear panel.

Sending Card Installation

Installation Procedure

Step-by-step guide for installing the sending card, including removing the baffle, inserting the card, and connecting power.

Signal Connection

Video Source and Display Connections

Instructions for connecting video sources to LVP515 inputs and LVP515 outputs to sending cards or displays.

Power and Signal Setup

Powering On the Device

Ensures all connections are correct before connecting power and turning on the LVP515 and source devices.

Input Signal Selection and Verification

Guides on selecting input sources and verifying signal status, format, and switching effects on the LCD screen.

Display Output Configuration

Output Resolution Setup

Adjusts the LVP515 output resolution to match the LED screen's pixel resolution for optimal display.

Output Image Width and Height Setup

Configures the output image width and height to precisely match the LED screen dimensions.

Computer Resolution Setup

Sets the computer graphics card resolution to be compatible with the LVP515, often using 'copy' or 'dual display' modes.

Advanced Display Modes and Settings

Full and Partial Display Control

Manages screen display modes, allowing switching between full-screen and pixel-to-pixel (part) display.

PIP/PBP Function Activation

Details on how to turn on and switch between Picture-in-Picture (PIP) and Picture-by-Picture (PBP) functions.

PIP/PBP Parameter Configuration

Guides on setting PIP/PBP parameters like main and PIP output width, height, and start positions.

Document Revision History

Revised Record Sheet

Details the document's revision history, including version number, date, and a brief description of changes.