7
OTHER USE
This panel can also be used with devices other than the OCS portable power supply. In that
case, a separate charge regulator is required. First connect the panel to the charge controller
and the battery. As soon as the battery is recognized, it will start charging. There are MPPT
controllers that automatically recognize the connected battery type and then switch to the
custom charge control function.
The scheme then looks like this.
PARTS
4 3 2
5 1
1. Set of battery clamps (not included)
2. Charge controller (not included)
3. Solar panel
4. Hanging hooks
5. Fuse
To Next Page
Loading...
