How to troubleshoot a Veco Thermostat with a display that is off?
If the display of your Veco Thermostat is off, you should: * Check the power supply to the electronic board of the Compact/fancoil unit. * Check the connection cable plug both from the powerboard side and from the panel side. * Check the cable integrity.
Provides necessary information for installation, operation, and maintenance of the Climma system.
Highlights the new Climma C-TOUCH thermostats' ease of use and features like weekly scheduler and customizable interfaces.
Emphasizes operator responsibility for accidents and recommends disconnecting power before operations and wearing safety gear.
Guides on choosing the right location for the display, considering ambient temperature and air circulation.
Provides instructions and diagrams for making a cut-out and mounting the display unit.
Details the CR2032 battery, its voltage, type, and usage when the panel is powered off.
Details the process for changing the CR2032 battery in the C-Touch display, including unplugging and reassembling.
Explains the home screen layout, icons, symbols, and their meanings for unit status and modes.
Guides on selecting language and configuring the unit type (Compact/Fancoil) upon first startup.
Details access to the main menu and its various functions like Mode, Language, Display Settings, Errors, and Troubleshooting.
Allows changing the unit's mode of operation among AUTO, FAN ONLY, DEHUMIDIFY, COOL ONLY, HEAT ONLY, and SCHEDULE.
Enables modification of language, time and date settings on the display.
Allows adjustment of screen brightness, screen saver, screen colors, and main screen layout.
Provides access to active errors screen and the warning/error log for diagnostics.
Allows modification of initial board and display settings like board program, Modbus address, and unit of measure.
Screen for authorized service centers to access hidden parameters under password protection.
Guides users in basic maintenance and troubleshooting, offering system information and a guide.
Shows basic display information like model, software version, and board code.
Allows programming the unit to start/stop, select mode and temperature based on time and day.
Details error codes, descriptions, and notes for system warnings and alarms.
Provides solutions for common problems like 'DISPLAY IS OFF' and 'DATE AND TIME ARE NOT SET'.
The Climma C-TOUCH is a marine air conditioning control system designed for ease of use and optimal climate management on board. This device serves as an installation, usage, and maintenance manual for the C-TOUCH control, which is compatible with various Climma self-contained Compact units (Mk3 and EF series with MK3 electronic control) and Climma fancoils (with Mv8 and MCON electronic control). It is designed to replace older Mk3 and Mk2 controls, though an adjusting kit from 4 to 3 positions is required for replacement due to the C-TOUCH's 3-position cutout.
The Climma C-TOUCH thermostat provides comprehensive control over a marine air conditioning system. Its primary function is to allow users to set and maintain desired cabin temperatures, manage fan speeds, and schedule operation. The system features a user-friendly interface with a 2.4-inch LCD display (320x240 px) that shows current temperature, operating mode, fan speed, and any active warnings or errors.
The main menu offers several functionalities:
The Climma C-TOUCH control system is intended for installation by authorized Climma service centers to ensure proper functioning and compliance with safety guidelines. Failure to follow installation and maintenance instructions may lead to problems or incorrect system operation.
General| Brand | Veco |
|---|---|
| Model | Climma C-TOUCH |
| Category | Thermostat |
| Language | English |
To Next Page