VECTOR GRAPmC, INC.
[CTRL
D]
-
clears
the
screen
before executing any CCP command;
it
must be
entered
before the command.
You
can also
enter
[CTRL
D]
[RETURN]
to
clear
the screen.
[CTRL
Z]
- allows you
to
end the input from the terminal.
Only
used when
entering a file from the keyboard, when the PIP program has assigned the
keyboard
as
an
input file. (This, like several
other
CCP commands, is a
carry-over
from
the
days when
the
keyboard
was a
Teletype-style
terminal, working directly
to
punched tape.)
[CTRL P] -
copies
all
subsequent
console
output
to
the
currently assigned
printer.
To cancel [CTRL P], simply
enter
a second [CTRL pl.
[CTRL
K]
-
sends
a form feed
to
the currently assigned printer;
if
no printer
is assigned, [CTRL
K]
will be ignored.
[CTRL
S1
-
stops
the
terminal
output
temporarily;
program
execution and
output
continues
when any
key,
except
[CTRL
C],
is
entered
at
the
terminal.
This
feature
is
used
to
stop
output
on high speed terminals
(such
as
the
CRT
on
your
Vector
4) in
order
to
view a
segment
of
output before continuing.
Below
is
a
list
of
the
"resident
commands"
that
you will be using with your
system.
Every command will be explained and described. The
format
for
the
commands is
as
follows: AXeommand) [RETURN].
Note
that,
although all commands
are
represented in UPP ER CASE,
the
COP
accepts
either upper or lower case
letters
as
input.
List
of
Resident CQlDmands
ERA
nffi
REN
SAVE
USER n
TYPE
TPA
BSPL
vm-2
Erases specified files
Lists file names in the directory
Renames the specified file
Saves memory contents in a file
Allows you
to
choose different working areas within a drive
Types
or
displays
the
contents of a file on the logged disk
to
the terminal
Jumps to address 100H in user's memory
Begins
Spooler
7100-0001 9-01-82 - Rev. A
To Next Page
Loading...