Vector Graphic Vector 4 - Page 184

VECTOR GRAPHIC, INC.
SYMPTOM 3 - VECTOR 4 WON'T BOOT
Symptom Reyiew: Your Vector 4 has successfully powered on, and the screen
displays the following banner:
VECTOR 4 SSC EXECUTIVE 1.X
[W] ••• Winchester boot
[T]
... System Test
SBe>
[F] ••• Floppy boot
Furthermore, no error messages appear as a result of the Automatic System
Test, but when either P or W key is pressed, the screen doesn run. (after
several seconds)
clear and display:
VECTOR 4 CP 1M VERSION leX
PRINTER 1 LOADED WITH <current setting>
PRINTER 2 LOADED WITH <current setting>
A)
Por A Floppy-only System:
1. Determine which diskette supplied with your system is the Vector Graphic
System Diskette #1.
X B-8
7100-0001
9-01-82 - Rev. A