EasyManuals Logo
Home>Vector>Freezer>Deluxe Console VEC223F

Vector Deluxe Console VEC223F User Manual

Vector Deluxe Console VEC223F
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
6
CONNECTING TO A PORTABLE 12 VOLT DC POWER SUPPLY,
FOR USE AWAY FROM VEHICLE
- Make sure that the unit’s COOL/WARM/OFF switch is in the OFF position.
- Insert the 12 volt DC socket on the portable power supply.
- Continue with steps 4-9, for cooler or warmer function. Observe all CAUTIONS
AND WARNINGS.
Note: With a current draw of approximately 4-amps (48-watts), the unit will operate
for approximately 50 minutes from a fully charged 12 volt DC portable power
supply such as the Vector Pocket Power™ or Pocket Generator™. A standard 17
Ampere Hour Jump-starter/Power Supply such as the VEC021 series - can
operate the cooler/warmer for approximately 6 hours.
CONNECTING TO AN AC (120V)/DC (12V) POWER ADAPTER
Plug converter’s (VEC004A - 120V) power cord into standard 120 Volt 60 HZ outlet
• Make sure that unit’s COOL/WARM/OFF switch is in the off position
• Insert the 12 Volt DC socket of the AC/DC power adapter
• Continue with steps 4–9 for cooler or warmer function
OBSERVE ALL CAUTIONS AND WARNINGS.
FUSE REPLACEMENT
The power cord is fuse-protected against short-circuiting, by a 5-amp fuse
located in the tip of the 12 Volt DC plug. If the DC socket is powered, but the unit
does not operate, then the cooler/warmer fuse may be open.
To inspect or replace the DC Power Cord Fuse
1. Unscrew the end-cap of the cigarette lighter plug.
2. Remove fuse, inspect it for an open element, and replace with a new 10-amp
fuse, if needed.
3. Re-attach the end-cap to the plug.
4. If new fuse opens, call Vector® Customer Service department for further
instructions and possible return/replacement. This unit is not user-serviceable,
it must be returned to Vector® Manufacturing for professional service or
repair. Any attempt to service by user will void warranty.
CARE AND MAINTENANCE
The Vector
®
Deluxe Console Thermoelectric Travel Cooler & Warmer is ruggedly
constructed to provide years of dependable service.
- After each use, clean the unit, inside and out, with a soft cloth and mild
soap solution.
- Do not scrape, scratch or puncture the surface of the cooler with sharp objects
or abrasives.
- Dry the unit properly and store in a cool, dry place.
- Always make sure the power cord is disconnected before storing.
- Never allow the cooler/warmer to be immersed in liquid.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vector Deluxe Console VEC223F and is the answer not in the manual?

Vector Deluxe Console VEC223F Specifications

General IconGeneral
BrandVector
ModelDeluxe Console VEC223F
CategoryFreezer
LanguageEnglish

Related product manuals